Cisco CCNA exam: Are you ready? Take this 10-question quiz to find out

1)
Host A receives a frame and discards it after determining that it is corrupt. At which OSI layer are frames checked for errors?

• Application
• Network
• Physical
• Data-link
• FCS or CRC

2)

Identify which of the services below use both TCP and UDP ports:

• FTP
• TFTP
• DNS
• SSH
• TELNET

3)

After carefully examining the network diagram above, select the correct statement regarding broadcast and collision domains:

• There is one broadcast domain and seven collision domains.
• There are two broadcast domains and five collision domains.
• There is one broadcast domain and 12 collision domains.
• There are two broadcast domains and seven collision domains.
• There are two broadcast domains and 12 collision domains.

4)

What would the result be when the following commands are executed on a Cisco Catalyst switch:

TechTarget-SW1 (config-if)# switchport port-security
TechTarget-SW1 (config-if)# switchport port-security mac-address sticky

• The MAC address learned dynamically is saved in the switch's running-configuration.
• The MAC address learned dynamically is saved in the switch's startup-configuration.
• The MAC address learned dynamically is saved permanently in the VLAN database.
• The statically configured MAC address is saved in the switch's running-configuration when frames from that address are received.
• The first MAC address "seen" on the specific port is allowed to access the network until the port-security timer expires.

5)

What actions does the Dynamic Host Configuration Protocol (DHCP) server take when there is an IP address conflict as shown above?

• The DHCP server will automatically resolve all conflicts after their lease is over.
• The IP addresses are removed from the DHCP pool until the conflicts are resolved.
• The IP addresses detected by gratuitous Address Resolution Protocol are removed from the pool.
• The IP addresses detected by ping are removed from the pool.
• The DHCP server needs to be restarted in order to automatically clear all conflicts.

6)

Which of the following options are used in standard access lists?

• Destination address and subnet mask
• Source address and subnet mask
• Destination address and wildcard mask
• Source address and wildcard mask

7)

Which of the following commands is used to verify the encapsulation type on a frame relay link?

• show frame-relay lmi
• show frame-relay
• show interfaces
• show frame-relay pvc
• show frame-relay map

8)

In the network diagram above, which path will packets take when travelling from host 192.168.50.126 to host 192.168.50.5?

• Packets will travel from R3 to R2 to R1.
• Packets will travel from R1 to R3 to R2.
• Packets will travel from R3 to R1 and return back to R3.
• Packets will travel from R3 to R1 and from R3 to R2 to R1.
• Packets will travel from R1 to R2 and back.

9)

One of the routers in your company has just received information about network 172.16.10.0/24 from multiple sources. Which of the below will the router consider as the most reliable source for network 172.16.10.0/24?

• An EIGRP update for network 172.16.10.0/24
• An OSPF update for network 172.16.10.0/24
• A static route to network 172.16.10.0/24
• A default route with a next hop address of 172.16.0.1
• A directly connected interface with an IP address of 172.16.10.254/24
• None of the above. The router will discard the update.

10)

Your manager has requested you indicate which of the above ports will be Spanning Tree Protocol (STP)-designated ports:

• Switch V1, Port Fa0/0; Switch V3, Port Fa0/0; Switch V3, Port Fa0/24
• Switch V1, Port Fa0/24; Switch V2, Port Fa0/0; Switch V2, Port Fa0/24